You bought your new motorcycle, & you want to take your motorcycle on the road. That’s good, you know your motorcycle is new and it needs some extra care. The first 1000 km are very crucial for your motorcycle, if you can control your emotions then your brand new motorcycle is going to be with you for a very long time. This period is called the engine breaking-in period.
In a brand-new motorcycle engine, parts are tightly packed into each other, which makes your engine go hot quickly. If this thing is done properly, your bike will feel very smooth and it will give good mileage and performance in the long run.
In this article, I am going to tell you something, which you need to take care of during 1st 1000 km of your bike’s engine run and it is really important.

Engine Breaking-in period
“Engine breaking” during the period of motorcycle break-in refers to the practice of gradually varying the engine speed and load during the initial stages of using a new motorcycle.
During the break-in period, the engine components are not yet fully seated, and the goal of engine breaking is to provide gentle, incremental stress on the engine and its moving parts, so as to ensure that they wear in a way that optimizes performance and durability over the long term.
The specific techniques for engine breaking can vary depending on the manufacturer and model of the motorcycle but generally involve gradually increasing the RPM and load on the engine over the first few hundred kilometers of use. This can help to ensure that the engine’s components settle in properly, allowing for optimal performance and longevity over the lifetime of the motorcycle.
How to perform engine breaking?
Performing engine breaking during the break-in period of a motorcycle involves gradually varying the engine speed and load while avoiding any sudden or extreme changes in RPM or throttle position. Here are some general guidelines for performing engine breaking on a motorcycle:
- Follow the manufacturer’s recommendations: Every motorcycle has different engine-breaking requirements, so it’s important to follow the manufacturer’s recommendations for your specific make and model. So always read your owner’s book for better understanding.
- Start with gentle acceleration: During the first few hundred miles of use, avoid rapid acceleration and high RPMs. Instead, gradually build up speed and allow the engine to warm up fully before increasing the throttle.
- Vary the engine speed and load: During the break-in period, it’s important to vary the engine speed and load to ensure that all components wear in evenly. This can be done by gradually increasing and decreasing RPMs, and by varying throttle position and gear selection.
- Avoid over-revving: While it’s important to vary the engine speed, avoid over-revving the engine or holding it at a constant high RPM for an extended period of time.
- Don’t lug the engine: Lugging the engine (i.e. running at low RPMs in high gear) can put excessive strain on the engine components and should be avoided during the break-in period.
- Use engine braking: Engine braking (i.e. using the engine to slow down the motorcycle by downshifting) is a useful technique for engine breaking, as it can help to vary the engine speed and load.
Overall, the goal of engine braking is to provide gentle, incremental stress on the engine and its moving parts during the break-in period, so as to ensure optimal performance and durability over the long term. By following these tips you can do proper engine breaking-in.
What to do on a new motorcycle?
Getting a new motorcycle is a big thing, especially if it is 1st one. Here are some tips you should follow to get the best out of it.
- Read the owner’s manual: The owner’s manual is your go-to resource for information about your motorcycle, including its specifications, maintenance requirements, and safety features. Make sure to read it thoroughly before using your motorcycle.
- Perform a pre-ride inspection: Before each ride, check the tires, brakes, lights, controls, and other critical components to ensure that they are in good condition and working properly. This will help you to identify any potential safety issues before you hit the road.
- Get comfortable with the controls: Spend some time practicing operating the throttle, brakes, clutch, and other controls on your motorcycle in a safe, controlled environment. This will help you to get comfortable with your new bike and improve your riding skills.
- Wear proper gear: Always wear appropriate protective gear, including a helmet, gloves, boots, and a jacket, to help protect yourself in the event of an accident.
- Follow recommended break-in procedures: To ensure optimal performance and longevity, follow the manufacturer’s recommended break-in procedures, which typically involve gradually increasing engine speed and load during the first few hundred km of use.
- Keep up with maintenance: Regular maintenance is critical to keeping your motorcycle running smoothly and safely. Follow the manufacturer’s recommended maintenance schedule and have your motorcycle serviced regularly by a qualified mechanic.
By following these tips and taking proper care of your new motorcycle, you can help ensure a safe and enjoyable riding experience for years to come.